Genmega GT5000 EMV Upgrade Kit

Genmega GT5000 EMV Upgrade Kit

Upgrade kits include:

• TDR-R240N EMV card reader
• cable
• bracket
• screws

What you need to know:

• The new TDR reader is backward compatible with all models that currently support an EMV reader.
• The only exception to this are C4000 machines, which due to the bezel shape will require continuing use of the KYTronics readers.
• The TDR readers use a different cable and mounting bracket - you cannot use the KYTronics cables or mounting brackets.
• There is no need to update software to support the new reader - if your software currently supports the KYT reader - it will also support the TDR reader

If upgrading from a previously upgraded machine with the KYT-7916 EMV card reader, you will need to change out the bracket and cable. If your previous kit utilized the reset board, you will need to remove that from the side of the mainboard as well as the included jumper cable.

What is different about the TDR card reader?

• The circuit board is mounted on the top side of the reader to help reduce liquid damage.
• The card latching arm remains unlocked if there is no power to the ATM.
• The underside of the reader is open to help drop coins that may be inserted.
• This new reader does NOT require use of a 'Reset' board when used with older machines.

Reference Numbers: 281208874, 281215544, 50001

Compatible with: GT5000

Manufacturer Part Number: 281215544